**MJ Splitter Meets Delta Model 10: Will Your Metal Throat Plate Survive the Test?**
(Can I Use Mj Splitter On Delta Model 10 Metal Throat Plate)
So you’ve got a Delta Model 10 table saw. You love it. It’s tough, reliable, and handles heavy jobs like a champ. But now you’re eyeing that MJ Splitter—a popular add-on for reducing kickback and boosting safety. The big question hits: Can you slap an MJ Splitter onto your Delta Model 10’s metal throat plate without turning your workshop into a disaster zone? Let’s dig in.
First off, throat plates matter. They’re the little guys sitting around your saw blade, guiding materials and keeping things stable. The Delta Model 10’s metal throat plate is built to last, no doubt. But adding a splitter changes the game. Splitters sit behind the blade, preventing wood from pinching the blade and rocketing back at you. The MJ Splitter is a favorite because it’s simple, bolt-on, and doesn’t need fancy adjustments. But here’s the catch: not all throat plates play nice with splitters.
The Delta Model 10’s stock metal throat plate isn’t designed for add-ons. It’s flat, smooth, and has zero slots or holes for attaching extras. That’s a problem. The MJ Splitter needs a way to anchor itself securely. If you try rigging it with glue, tape, or hope, you’re asking for trouble. A wobbly splitter is worse than none at all—it can misalign cuts or even snap mid-job.
But wait. Maybe you’re the DIY type. Could you modify the throat plate? Sure, if you’ve got tools and time. Drill precise holes to match the MJ Splitter’s base, then bolt it down. Sounds easy, but metal throat plates are stubborn. They’re thicker than plastic ones, so drilling requires patience and sharp bits. Mess up the alignment, and your plate becomes a fancy paperweight. Even if you nail the holes, the splitter’s height must match the blade perfectly. Too high, and it interferes with cuts. Too low, and it’s useless.
Another angle: aftermarket throat plates. Companies like SharkGuard or Microjig (yes, the MJ Splitter folks) sell plates pre-drilled for splitters. Swap out the Delta’s plate for one of these, and you’re golden. But check specs first. The Model 10 has unique dimensions. A generic plate might not fit snugly, creating gaps that ruin precision.
Let’s talk real-world testing. One woodworker tried the MJ Splitter on a modified Delta plate. They drilled two holes, used lock nuts to secure the splitter, and tweaked the height with washers. Results? Mixed. For thin stock and straight cuts, it worked fine. But thicker hardwood caused vibration, loosening the nuts over time. They ended up switching to a custom plastic plate for lighter weight and easier adjustments.
Safety is key here. The MJ Splitter’s job is to protect you. If your setup feels sketchy, it probably is. The Delta Model 10 is a beast, but it wasn’t made for modern add-ons. Sometimes, upgrading to a newer saw with splitter-friendly features is smarter than hacking old gear.
Still determined? Go slow. Double-check measurements. Test with scrap wood before tackling big projects. And keep an eye on bolt tightness—vibration loves to undo hard work. Your fingers (and finished projects) will thank you.
(Can I Use Mj Splitter On Delta Model 10 Metal Throat Plate)
No magic answer exists. It’s about balancing cost, effort, and risk. Some swear by modified setups. Others bail after the first hiccup. Either way, knowing your tools’ limits—and your own patience—is half the battle. Now grab that caliper, fire up the drill press, and maybe keep the first-aid kit handy. Just in case.
Inquiry us
if you want to want to know more, please feel free to contact us. (nanotrun@yahoo.com)