iVakavuvuli ni cakacaka: Taumada, use a mold to print the pattern on the surface of the peleti sitila with ink, and then use a potion to corrode the stainless steel plate to obtain the desired pattern effect.
Na etching e wasei ki na tolu na mataqali .: ceuceu ni rarama, grabadura de pantalla de seda, y grabado de eliminación de titanio:
1) Photosensitive etching: Using the principle of film exposure, patterns are printed on the surface of stainless steel plates. It is suitable for irregular lengths, small batches, or workpieces. Photosensitive etching must be done if the etching depth is above 20 C. The maximum depth of etching that can be done on stainless steel is 50 C. C.
2) Silk screen etching: Silk screen printing involves printing the pattern mold with ink on the stainless steel plate and using chemical corrosion to corrode the parts that are not coated with ink to form the pattern. Silk screen printing is suitable for etching fixed-length and large-volume flat plates, and the etching depth is within 3-15C.
3) Titanium fading moment: There is no depth on the surface, and part of the color is oxidized, causing patterns to appear on the surface of the stainless steel plate.
Etching working procedures: printing (coating with ink) – drying the plate – vakani na peleti ki na misini . – korosi – ink removal – savasava – mamaca – finished film quality inspection standards: no acid spots on the board surface, no rotten edges, and no ink. Ivakamacala: It is recommended to use 304 material for etching as much as possible. Reason: 201 material contains low nickel, the etching position will turn black, the board will be easily burned, and the service life will be short. The deeper the etching, the harder it is to protect the ink and the more expensive it is.
Etched stainless steel honeycomb panel elevator door panel
Dausoli iyaya
Peleti kaukamea 4u e dua na kabani levu e vakanamata tiko ki na vakadidike ., veivakatorocaketaki, buli kei na volitaki ni iyaya kopa. Na vuqa na yavu ni bulibuli kei na R .&D na veivanua, na kena ivoli kopa e volitaka vinaka ena makete ni vanua kei na vanua tani ka ra ciqoma vinaka na kasitama ..
Taucoko na veimataqali, vinaka sara, vakadidike vou kei na veivakatorocaketaki. Na veiqaravi vakaitaukei kei na veitalanoa vakacakacaka e tiko .. Kevaka o gadreva na iyaya clad kaukamea ., Kerekere mo ni veitaratara kei keda.